DISPERSING AGENT FOR CERAMIC BODIES
CHEMICAL COMPOSITION
Synthetic polyelectrolyte
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: Liquid light brown
DENSITY at 20°c: 1500±10 gr/l
PH: 13-14
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP FLUX 771/M is a deflocullant even at very low percentage. It is suitable for the treatment of bodies.
HP FLUX 771/M is generally added in the ball mill at the beginning of grinding stage. Due to the fact that HP FLUX 771/M is liquid it is appropriate to adjust the viscosity of the slips at any phase of process. And also allows a better control on the thixotropy which can be adjusted keeping the density of the slip unchanged.
USAGE & DOSAGE: the range is from 0.4 to 0.8% calculated on dry bases

DISPERSING AGENT FOR CERAMIC BODIES
CHEMICAL COMPOSITION
Synthetic polyelectrolyte
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: Liquid light brown
DENSITY at 20°c: 1520±10 gr/l
PH: 13-14
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP FLUX 772/M is a deflocullant even at very low percentage. It is suitable for the treatment of bodies.
HP FLUX 772/M is generally added in the ball mill at the beginning of grinding stage. Due to the fact that HP FLUX 772/M is liquid it is appropriate to adjust the viscosity of the slips at any phase of process. And also allows a better control on the thixotropy which can be adjusted keeping the density of the slip unchanged.
USAGE & DOSAGE: the range is from 0.5 to 1% calculated on dry bases

DISPERSING AGENT FOR CERAMIC BODIES
CHEMICAL COMPOSITION
Synthetic polyelectrolyte and sodium silicate
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: Liquid light brown
DENSITY at 20°c: 1450±10 gr/l
PH: 13-14
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP FLUX 777 is a deflocullant even at very low percentage. It is suitable for the treatment of bodies.
HP FLUX 777 is generally added in the ball mill at the beginning of grinding stage. Due to the fact that HP FLUX 777 is liquid it is appropriate to adjust the viscosity of the slips at any phase of process. And also allows a better control on the thixotropy which can be adjusted keeping the density of the slip unchanged.
USAGE & DOSAGE: the range is from 0.4 to 0.8% calculated on dry bases

DISPERSING AGENT FOR CERAMIC BODIES
CHEMICAL COMPOSITION
Synthetic polyelectrolyte and sodium silicate
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: Liquid light brown
DENSITY at 20°c: 1530±10 gr/l
PH: 13-14
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP FLUX 777/D is a deflocullant even at very low percentage. It is suitable for the treatment of bodies.
HP FLUX 777/D is generally added in the ball mill at the beginning of grinding stage. Due to the fact that HP FLUX 777/D is liquid it is appropriate to adjust the viscosity of the slips at any phase of process. And also allows a better control on the thixotropy which can be adjusted keeping the density of the slip unchanged.
USAGE & DOSAGE: the range is from 0.4 to 0.8% calculated on dry bases

DISPERSING AGENT FOR CERAMIC BODIES
CHEMICAL COMPOSITION
Synthetic polyelectrolyte
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: Liquid light brown
DENSITY at 20°c: 1550±10 gr/l
PH: 13-14
SOLUBILITY: Total in water
CHARACTERISTIC OF USE HP FLUX 779/M is a deflocullant even at very low percentage. It is suitable for the treatment of bodies.
HP FLUX 779/M is generally added in the ball mill at the beginning of grinding stage. Due to the fact that HP FLUX 779/M is liquid it is appropriate to adjust the viscosity of the slips at any phase of process. And also allows a better control on the thixotropy which can be adjusted keeping the density of the slip unchanged.
USAGE & DOSAGE: the range is from 0.4 to 0.8% calculated on dry bases

FLUIDIZING AGENT FOR GLAZE
CHEMICAL COMPOSITION
Water solution of sodium Hexa Meta phosphate
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: colorless Liquid
DENSITY at 20°c: 1400±10 gr/l
PH( 40% solution): 5
CHARACTERISTIC OF USE
HP FLUX SM 318 shows a notable fluidizing and plasticizing effect on glaze and engobe. It is used when it is necessary conferring to the glaze fluidity and fluency.
USAGE & DOSAGE: the range is from 0.1 up to 0.4 during grinding work.