PURIFIED GLUE FOR CERAMIC GLAZE CHEMICAL COMPOSITION
Carboxyl methyl cellulose, sodic salt CHEMICAL- PHYSICAL CHARACTERISTICS
ASPECT: Ivory small grains
PURITY: 98%
PH (sol. at 20°c): 8, 00-11, 00
MOISTURE: 8% max
VISCOSITY (Sol. 2%): 200-500 cps Brookfield DV III + 60 rpm CHARACTERISTIC OF USE
Medium viscosity
HYDROCOL CM 564 is sodium carboxyl methyl cellulose with medium viscosity. Added into the mill it acts as a glaze viscosity regulator. Glaze becomes slightly plastic.
HYDROCOL CM 564 increase binding within the glaze layers and it link the glaze onto the body.
USAGE & DOSAGE: The range is from 0.1 to 0.4 calculated on dry base
HYDROCOL CM 566
PURIFIED GLUE FOR CERAMIC GLAZE CHEMICAL COMPOSITION
Carboxyl methyl cellulose, sodic salt CHEMICAL- PHYSICAL CHARACTERISTICS
ASPECT: Ivory small grains
PURITY: 98-99%
PH (sol. at 20°c): 6.5-8.5
MOISTURE: 8% max
VISCOSITY (Sol. 2%): 15-30 cps Brookfield DV III + 60 rpm CHARACTERISTIC OF USE
Low viscosity
HYDROCOL CM 566 is sodium carboxyl methyl cellulose with low viscosity. Added into the mill it acts as a glaze viscosity regulator. Glazes become slightly plastic.
HYDROCOL CM 566 increase binding within the glaze layers and it link the glaze onto the body.
USAGE & DOSAGE: The range is from 0.1 to 0.4 calculated on dry base
HYDROCOL CM 568
PURIFIED GLUE FOR CERAMIC GLAZE CHEMICAL COMPOSITION
Carboxyl methyl cellulose, sodic salt CHEMICAL- PHYSICAL CHARACTERISTICS
ASPECT: Ivory small grains
PURITY: 98-99%
PH (sol. at 20°c): 6-8
MOISTURE: 8% max
VISCOSITY (Sol. 2%): 1000-3000 cps Brookfield DV III + 60 rpm CHARACTERISTIC OF USE
High viscosity
HYDROCOL CM 568 is sodium carboxyl methyl cellulose with high viscosity. Added into the mill it acts as a glaze viscosity regulator. Glazes become slightly plastic.
HYDROCOL CM 568 increase binding within the glaze layers and it link the glaze onto the body.
USAGE & DOSAGE: The range is from 0.1 to 0.4 calculated on dry base
