|
HP OIL 1241
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
03 Standard engraving
CHEMICAL COMPOSITION
Ethylene glycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1060±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 14 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 1241 is a screen printing medium and it is provided with a good suspension, lubricating and a fast drying time. It also has particular anti foam to avoid bubbles inside and outside the paste and make the viscosity of printing paste constant.
HP OIL 301
SCREEN PRINTING MEDIUM FOR THIRD FIRING
TYPE OF GRAPHICS
Third firing Decoration
CHEMICAL COMPOSITION
Polyglcols, Isopropyle and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1050±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 15 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 301 is a water base screen printing medium for third firing. It is indicated to obtain high and low thickness. It has low viscosity and alcohol inside to speed up the drying time.
HP OIL 303
SCREEN PRINTING MEDIUM FOR THIRD FIRING
TYPE OF GRAPHICS
Third firing Decoration
CHEMICAL COMPOSITION
Polyglcols, Isopropyle and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1050±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 45 Sec
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 303 is a water based screen printing medium for third firing. It is indicated to obtain high and low thickness. It has high viscosity and less alcohol inside to delay the drying time.
HP OIL 421
ROTOSCREEN PRINTING MEDIUM
TYPE OF GRAPHICS
Rotoscreen designs
CHEMICAL COMPOSITION
Poly Ethylene glycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1110±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 55 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 421 is a Roto screen printing medium and it is provided with a good suspension, lubricating and a low drying time. It also has particular anti foam to avoid bubbles inside and outside the paste to make the viscosity of printing paste constant.
HP OIL 514
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
03 Standard engraving high definitions
CHEMICAL COMPOSITION
Ethylene glycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1090±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 14 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 541 is a screen printing medium and it is provided with a good suspension, lubricating and a long drying time. It also has particular anti foam to avoid bubbles inside and outside the paste and make the viscosity of printing paste constant. Thanks to its composition it has the characteristic to prepare high viscosity printing paste (more than 25 seconds)
HP OIL 511
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
03 Standard engraving
CHEMICAL COMPOSITION
Ethylene glycols and cellulosic resins
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1060±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 13 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 511 is a screen printing medium and it is provided with a good suspension, lubricating and a fast drying time. It also has particular anti foam to avoid bubbles inside and outside the paste and make the viscosity of printing paste constant. Thanks to its composition it has the characteristic to prepare low viscosity printing paste (less than 20 seconds)
HP OIL 534
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
03 Standard engraving
CHEMICAL COMPOSITION
Ethylene glycols and cellulosic resins
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1090±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 13 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 534 is a screen printing medium and it is provided with a good suspension, lubricating and a fast drying time. It also has particular anti foam to avoid bubbles inside and outside the paste and make the viscosity of printing paste constant. Thanks to its composition it has the characteristic to reduce the consumption of pigments.
HP OIL 537
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
GS and MASK engraving
CHEMICAL COMPOSITION
Ethylene glycols and cellulosic resins
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1100±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 12 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 537 is indicated for the preparation of screen printing bodies used at high density (more than 1800 gr/l) and standard viscosity for thickness decoration. This medium has a high moisturizing power which consents to work at high density too.
HP OIL 1240
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
03 Standard engraving
CHEMICAL COMPOSITION
Ethylene glycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1060±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 13 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 1240 is a screen printing medium and it is provided with a good suspension, lubricating and a medium drying time. It also has particular anti foam to avoid bubbles inside and outside the paste and make the viscosity of printing paste constant.
HP OIL 1241
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
03 Standard engraving
CHEMICAL COMPOSITION
Ethylene glycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1060±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 13 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 1241 is a screen printing medium and it is provided with a good suspension, lubricating and a medium drying time. It also has particular anti foam to avoid bubbles inside and outside the paste and make the viscosity of printing paste constant.
HP OIL 1248
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
03 Standard engraving high definitions
CHEMICAL COMPOSITION
Ethylene glycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1060±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 14 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 1248 is a screen printing medium and it is provided with a good suspension, lubricating and a long drying time. It also has particular anti foam to avoid bubbles inside and outside the paste and make the viscosity of printing paste constant.
HP OIL 1248 has the characteristic to dry slowly so it can be used for warm bodies.
HP OIL 1300
REVOLARGE MACHINE MEDIUM
APPLICATION FIELD
Colored glaze
CHEMICAL COMPOSITION
water solution of cellulosic resin
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1060±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 13 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL 1300 has a good quality-price ratio and it is particularly designed for preparing colored glaze in order to use in revolarge machines.
HP OIL D 550
SCREEN PRINTING MEDIUM FOR SILICONE ROLLERS
TYPE OF GRAPHICS
GS and MASK (thickness decorations) engraving
CHEMICAL COMPOSITION
Ethylene glycols and cellulosic resins
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1090±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 16 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL D550 is indicated for the preparation of screen printing bodies used at high density and standard viscosity for thickness decoration. This medium has a high moisturizing power which consents to work at high density too.
HP OIL SP 740
SCREEN PRINTING MEDIUM FOR LUSTER DESIGNS
TYPE OF GRAPHICS
Luster designs
CHEMICAL COMPOSITION
Ethylene glycols in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1090±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 17 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL SP 740 is a screen printing medium for luster design. It has no resin inside to get an uniform distribution of the color on the thick line on the surface.
HP OIL TR 305
SCREEN PRINTING MEDIUM FOR TRADITIONAL PRINTING MACHINE
TYPE OF GRAPHICS
High thickness decorations
CHEMICAL COMPOSITION
Ethylene glycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less medium
DENSITY at 20°c: 1100±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 11 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL TR 305 is a rapid drying medium with a moderate suspension capacity. It has the thixotropic characteristic to avoid fluidity of the paste when the machine is stopped.
It is necessary use fixing agent before screen printing application.
HP OIL TR 320
SCREEN PRINTING MEDIUM FOR TRADITIONAL PRINTING MACHINE
TYPE OF GRAPHICS
High thickness decorations
CHEMICAL COMPOSITION
Ethylene glycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less medium
DENSITY at 20°c: 1090±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 21 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL TR 320 is a moderate drying medium with a high suspension capacity. It has the thixotropic characteristic to avoid fluidity of the paste when the machine is stopped.
It is necessary use fixing agent before screen printing application.
HP OIL TT 1239
SCREEN PRINTING MEDIUM FOR TINTOMETER
TYPE OF GRAPHICS
Every kind of graphics
CHEMICAL COMPOSITION
Ethylene glycols< polyglycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1060±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 14 Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL TT 1239 is used for the preparation of the syrups for tintomere use. This medium has the characteristic to keep the solid part in a perfect suspension to avoid sedimentation in pipes and tanks. It also has the characteristic of normal medium such as fluidity and consistency as well.
HP OIL TT 1239/D
SCREEN PRINTING MEDIUM FOR TINTOMETER
TYPE OF GRAPHICS
Every kind of graphics
CHEMICAL COMPOSITION
Ethylene glycols< polyglycols and polymers in water solution
CHEMICAL- PHYSICAL CHARACTERISTICS
APPEREANCE: color less – opalescent medium
DENSITY at 20°c: 1060±10 gr/l
VISCOSITY at 20°c Ford Cup ɸ 4: 13Sec.
SOLUBILITY: Total in water
CHARACTERISTIC OF USE
HP OIL TT 1239/D is used for the preparation of the syrups for tintomere use. This medium has the characteristic to keep the solid part in a perfect suspension to avoid sedimentation in pipes and tanks. It also has the characteristic of normal medium such as fluidity and consistency as well.
|
